Choosing between POP, gypsum board and PVC ceilings is the first decision in any ceiling project. Each material has a sweet spot — here is the honest comparison from 20+ years of installing all three across Mumbai.
Quick Comparison Table
| Factor | POP | Gypsum | PVC |
|---|---|---|---|
| Cost (per sq.ft) | ₹95–220 | ₹120–260 | ₹80–190 |
| Design Flexibility | Excellent | Good | Limited |
| Installation Speed | Slower (wet process) | Fast | Fastest |
| Fire Resistance | Excellent | Excellent | Poor |
| Moisture Handling | Good (if dry) | Good (MR boards) | Excellent |
| Seamless Look | Perfect | Very good | Visible joints |
POP — Best for Designer Looks
Plaster of Paris is a wet mix applied on-site, so it can be shaped into any curve, cove or multi-level design with no visible joints. It's fire-resistant and suits living rooms, bedrooms and premium halls. Downside: installation is slower and needs proper drying time — and it must stay dry. Starts at ₹95/sq.ft.
Gypsum Board — Best for Speed & Flat Areas
Gypsum boards are pre-made panels fixed on metal framing — much faster than POP, perfectly flat, and easy to paint. Moisture-resistant and fire-rated variants exist for special needs. Best for offices, large flat ceilings and quick renovations. See our gypsum board installation.
PVC — Best for Wet Areas
PVC panels are waterproof, lightweight and the cheapest to maintain — ideal for kitchens, bathrooms and utility areas where moisture is a concern. The trade-off: limited designs, visible joints and poor fire resistance. We supply genuine PVC ceiling panels across Mumbai.
Our Recommendation
- Living rooms & bedrooms: POP for seamless designer looks.
- Offices & large flat areas: Gypsum board for speed and finish.
- Kitchens, bathrooms, utility: PVC for waterproof peace of mind.
Still confused? Book a free site visit — we recommend the right material for each room, no upselling.